Josephwheeler < Sandbox

How To Use A Shark Apex Uplight Corded Lift-Away Vacuum Cleaner For Guaranteed

Among Shark's many vacuum cleaner models, the Shark Apex Uplight has the simplest and most streamlined design.

However, it is because of this feature that the Shark Uplight vacuum cleaner is more difficult to maintain because it does not have many specialized parts. Let's explore how to use this machine to ensure quality!

❃❃❃ Check Here: https://www.facebook.com/sharkapexuplightvacuumreview/

1. Maintenance way

How to maintain the Shark Apex Uplight Vacuum after each use is very important. The first part that needs to be cleaned after each vacuum is the dust cup. To do this, just remove the dust cup and empty the dirt, then put it back in the machine.

The second part that affects the machine performance is the roller, floor brush. To clean them, you are following this guide:

Unlocked at very cheap of the ground nozzle, part removable base to permit for higher access to the comb roll and airway contact.
Light from below to check if the suction line is not blocked. If so, you'll need to clear out any objects or debris stuck in them.
After cleaning is complete, arrange each disassembled part in order. Press the button to reattach and lock

The third important part we need to pay attention to is the filter system. Shark Apex Uplight Duoclean uses a HEPA filter along with 2 fabric filters and a foam filter, so it needs to be returned every 3 months. Wash the filter to keep the suction power strong. Rinse the filter and let it air dry fully. Tapping dirt from the foam filter if needed between washes is the fastest way to make your machine last longer.

✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧ ✧

➷➷➷ This Content: Shark Apex Uplight Vacuum - Hope Or Nope? Deep Into A New Shark Vacuum Cleaner

2. While in use

In order for the Shark Uplight vacuum cleaner to keep good performance for a long time, I often pay attention to the selection of modes suitable for each type of surface.

With update mode: This is the main mode used when vacuuming in its original form and also the mode with the strongest suction. To select this mode, place your foot gently on the floor nozzle and tilt the handle back. Select the type of floor you want and then press the power button:

Hard Floor Suction: A mode dedicated to hard, slippery floors such as wooden floors, tile floors,... The suction brush rotates slowly to pick up fine dust and large debris on hard floors.
Carpet Suction: Specialized mode for sucking rough, difficult-to-clean surfaces. The suction brushes spin faster to pick up debris above and below the carpet surface.

With Lift-away mode: This is an auxiliary mode when vacuuming in a flexible detachable form. To select this mode, press the "Lift-Away Release" button to lift the wand to clean hard-to-reach places.

For the best vacuuming level, just like in the original suction form, I recommend that you choose the hard floor vacuum mode for all flat surfaces such as the top of the cabinet, under the bed, narrow crevices, wall corners, ...
When flexibly vacuuming on cushions, sofas, vacuuming on blankets and pillows, the carpet vacuuming mode will give a more satisfactory effect.

As summarized above, all the experiences of using Shark apex uplight vacuum have been experienced and drawn by me, promising to help you have a long, effective journey with this desirable vacuum cleaner.

Revision: r5 - 2024-01-10 - 17:12:13 - JosephWheeler

	Sandbox > Josephwheeler	Daya Bay webs: Public \| 中文 \| Internal \| *Help*
			Log In or Register